| Customization: | Available |
|---|---|
| Conductive Type: | Bipolar Integrated Circuit |
| Integration: | MSI |
|
Still deciding? Get samples of US$ 0.25/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FT230XS-R: USB Bridge, USB to UART USB 2.0 UART Interface 16-SSOP
Mfr. Part#: FT230XS-R
Mfr.: FTDI
Datasheet: 
(e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: ONE YEAR
|
Product Status
|
Active
|
|
|
Protocol
|
USB
|
|
|
Function
|
Bridge, USB to UART
|
|
|
Interface
|
UART
|
|
|
Standards
|
USB 2.0
|
|
|
Voltage - Supply
|
3.3V ~ 5V
|
|
|
Current - Supply
|
8mA
|
|
|
Operating Temperature
|
-40°C ~ 85°C
|
|
|
Package / Case
|
16-SSOP (0.154", 3.90mm Width)
|
|
|
Supplier Device Package
|
16-SSOP
|
|
|
Base Product Number
|
FT230XS
|
The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features:
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, and RS232) at TTL levels.
512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases. Configurable CBUS I/O pins.
Transmit and receive LED drive signals.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power source to enable improved charging. Device supplied pre-programmed with unique USB serial number.
USB Power Configurations; supports bus- powered, self-powered and bus-powered with power switching
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input; operates down to 1V8 with external pull ups. Tolerant of 5V input
Configurable I/O pin output drive strength; 4 mA (min) and 16 mA (max).
Integrated power-on-reset circuit.
Fully integrated AVCC supply filtering - no external filtering required.
UART signal inversion option.
+ 5V Single Supply Operation.
Internal 3V3/1V8 LDO regulators
Low operating and USB suspend current; 8mA (active-typ) and 125uA (suspend-typ).
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
Extended operating temperature range; -40 to 85ºC.
Available in compact Pb-free 16 pin SSOP and 16 pin QFN packages (both RoHS compliant).
Typical Applications
USB to RS232/RS422/RS485 Converters
Upgrading Legacy Peripherals to USB
Utilising USB to add system modularity
Incorporate USB interface to enable PC transfers for development system communication
Cellular and Cordless Phone USB data transfer cables and interfaces
Interfacing MCU/PLD/FPGA based designs to add USB connectivity
USB Audio and Low Bandwidth Video data transfer
USB Smart Card Readers
USB Instrumentation
Notice:
){kind=link}