STM8S005K6T6C MCU 8-bit STM8S STM8 IC STM8S005K6T6CTR microcontroller ic

• Customization: Available
• Conductive Type: Unipolar Integrated Circuit
• Integration: MSI
• Model NO.: STM8S005K6T6C
• Memory Type: DDR4
• Shape: Flat
• Technics: Semiconductor IC
• MFG.: ST
• D/C: 22+
• Package: LQFP-32
• Quality: Genuine New Original
• Catagory: IC
• Transport Package: Box
• Specification: electronic components
• Origin: China
• HS Code: 8542339000
• Production Capacity: 1000000PCS
• Package Size: 20.00cm * 20.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

Description

STM8S005K6T6C: 8-bit Microcontrollers - MCU 8-bit MCU Value Line 16 MHz 32kb Flash

Package: LQFP-32

Mfr. Part#: STM8S005K6T6C

Mfr.: ST
Datasheet: (e-mail or chat us for PDF file)

ROHS Status: 

Quality: 100% Original

Warranty: 180 days

The STM8S005C6/K6 value line 8-bit microcontrollers offer 32 Kbytes Flash program memory, plus 128 bytes of data EEPROM. They are referred to as medium-density devices in the STM8S microcontroller family reference manual (RM0016).All devices of STM8S005C6/K6 value line provide the following benefits: performance, robustness, reduced system cost and short development cycles.Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.The common family product architecture with compatible pinout, memory map and modular peripherals allow application scalability and reduced development cycles.All products operate from a 2.95 V to 5.5 V supply voltage.

Key Features

• Core
• Max f_CPU: 16 MHz
• Advanced STM8 core with Harvard architecture and 3-stage pipeline
• Extended instruction set
• Memories
• Medium-density Flash/EEPROMProgram memory: 32 Kbytes of Flash memory; data retention 20 years at 55 °C after 100 cyclesData memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles
• RAM: 2 Kbytes
• Clock, reset and supply management
• 2.95 V to 5.5 operating voltage
• Flexible clock control, 4 master clock sourcesLow-power crystal resonator oscillatorExternal clock inputInternal, user-trimmable 16 MHz RCInternal low-power 128 kHz RC
• Clock security system with clock monitor
• Power managementLow-power modes (wait, active-halt, halt)Switch-off peripheral clocks individuallyPermanently active, low-consumption power-on and power-down reset
• Interrupt management
• Nested interrupt controller with 32 interrupts
• Up to 37 external interrupts on 6 vectors
• Timers
• 2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)
• Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
• 8-bit basic timer with 8-bit prescaler
• Auto wakeup timer
• Window and independent watchdog timers
• Communications interfaces
• UART with clock output for synchronous operation, SmartCard, IrDA, LIN
• SPI interface up to 8 Mbit/s
• I²C interface up to 400 Kbit/s
• Analog to digital converter (ADC)
• 10-bit ADC, ± 1 LSB ADC with up to 10 multiplexed channels, scan mode and analog watchdog
• I/Os
• Up to 38 I/Os on a 48-pin package including 16 high-sink outputs
• Highly robust I/O design, immune against current injection
• Development support
• Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging

 

Part Status	Active
Core Processor	STM8
Core Size	8-Bit
Speed	16MHz
Connectivity	I²C, IrDA, LINbus, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT
Number of I/O	25
Program Memory Size	32KB (32K x 8)
Program Memory Type	FLASH
EEPROM Size	128 x 8
RAM Size	2K x 8
Voltage - Supply (Vcc/Vdd)	2.95 V ~ 5.5 V
Data Converters	A/D 7x10b
Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	32-LQFP
Supplier Device Package	32-LQFP (7x7)

Company Product Line

 

Certificates

Why choosing us

• Located in Shenzhen, the electronic market center of China.
• 100% guarantee components quality: Genuine Original.
• Sufficient stock on your urgent demand.
• Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
• Faster shipment: In stock components can ship the same day .
• 24 Hours service 

 

Notice:

1. Product images are for reference only.
2. You can contact sales person to apply for a better price.
3.  For more products, Pls do not hesitate to contact our Sales team.