Description
PIC12F1501-I/SN: 1.75KB Flash 64B RAM 6 I/O CLC CWG NCO 10-bit ADC 2.3V-5.5V
Package: SOIC-8
Mfr. Part#: PIC12F1501-I/SN
Mfr.: MICROCHIP
Datasheet: 
(e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: 180 days
| Part Status |
Active |
| Core Processor |
PIC |
| Core Size |
8-Bit |
| Speed |
20MHz |
| Connectivity |
- |
| Peripherals |
Brown-out Detect/Reset, POR, PWM, WDT |
| Number of I/O |
5 |
| Program Memory Size |
1.75KB (1K x 14) |
| Program Memory Type |
FLASH |
| EEPROM Size |
- |
| RAM Size |
64 x 8 |
| Voltage - Supply (Vcc/Vdd) |
2.3 V ~ 5.5 V |
| Data Converters |
A/D 4x10b |
| Oscillator Type |
Internal |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Package / Case |
8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package |
8-SOIC |
This family of devices contain an enhanced mid-range 8-bit CPU core. The CPU has 49 instructions. Interrupt capability includes automatic context saving. The hardware stack is 16 levels deep and has Overflow and Underflow Reset capability. Direct, Indirect, and Relative addressing modes are available. Two File Select Registers (FSRs) provide the ability to read program and data memory. Automatic Interrupt Context Saving 16-level Stack with Overflow and Underflow File Select Registers Instruction Set
Key Features
- High-Performance RISC CPU:
- C Compiler Optimized Architecture
- Only 49 Instructions
- 1 Kwords Linear Program Memory Addressing
- 64 bytes Linear Data Memory Addressing
- Operating Speed:
- DC - 20 MHz clock input
- DC - 200 ns instruction cycle
- Interrupt Capability with Automatic Context Saving
- 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
- Direct, Indirect and Relative Addressing modes:
- Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
- Flexible Oscillator Structure:
- 16 MHz Internal Oscillator Block:
- Factory calibrated to ±1%, typical
- Software selectable frequency range from 16 MHz to 31 kHz
- 31 kHz Low-Power Internal Oscillator
- Three External Clock modes up to 20 MHz
- Special Microcontroller Features:
- Operating Voltage Range:
- 1.8V to 3.6V (PIC12LF1501)
- 2.3V to 5.5V (PIC12F1501)
- Self-Programmable under Software Control
- Power-On Reset (POR)
- Power-up Timer (PWRT)
- Programmable Low-Power Brown-Out Reset (LPBOR)
- Extended Watchdog Timer (WDT):
- Programmable period from 1 ms to 256s
- Programmable Code Protection
- In-Circuit Serial Programming™ (ICSP™) via Two Pins
- Enhanced Low-Voltage Programming (LVP)
- In-Circuit Debug (ICD) via Two Pins
- Power-Saving Sleep mode:
- Low-Power Sleep mode
- Low-Power BOR (LPBOR)
- Integrated Temperature Indicator
- 128 Bytes High-Endurance Flash
- 100,000 write Flash endurance (minimum)
- Low-Power Features (PIC12LF1501):
- Standby Current:
- Watchdog Timer Current:
- Operating Current:
- 30 µA/MHz @ 1.8V, typical
- Peripheral Features:
- Analog-to-Digital Converter (ADC):
- 10-bit resolution
- Four external channels
- Three internal channels:
- Fixed Voltage Reference
- Digital-to-Analog Converter (DAC)
- Temperature Indicator channel
- Auto acquisition capability
- Conversion available during Sleep
- 5-Bit Digital-to-Analog Converter (DAC):
- Output available externally
- Positive reference selection
- Internal connections to comparators and ADC
- One Comparator:
- Rail-to-rail inputs
- Power mode control
- Software controllable hysteresis
- Voltage Reference:
- 1.024V Fixed Voltage Reference (FVR) with 1x, 2x and 4x Gain output levels
- Six I/O Pins (1 Input-only Pin):
- High current sink/source 25 mA/25 mA
- Individually programmable weak pull-ups
- Individually programmable Interrupt-On-Change (IOC) pins
- Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
- Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
- Four 10-bit PWM modules
- Two Configurable Logic Cell (CLC) modules:
- 16 selectable input source signals
- Four inputs per module
- Software control of combinational/sequential logic/state/clock functions
- AND/OR/XOR/D Flop/D Latch/SR/JK
- Inputs from external and internal sources
- Output available to pins and peripherals
- Operation while in Sleep
Company Product Line
Certificates
Why choosing us
- Located in Shenzhen, the electronic market center of China.
- 100% guarantee components quality: Genuine Original.
- Sufficient stock on your urgent demand.
- Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
- Faster shipment: In stock components can ship the same day .
- 24 Hours service
Notice:
- Product images are for reference only.
- You can contact sales person to apply for a better price.
- For more products, Pls do not hesitate to contact our Sales team.
Audited Supplier 
(e-mail or chat us for PDF file)
){kind=link}