electronic components IC S9S08DZ60F2MLH MCU 8-bit S08 CISC 60KB Flash

• shape: SMD
• Conductive Type: Bipolar Integrated Circuit
• Integration: MSI
• Technics: Semiconductor IC
• Application: Standard Generalized Integrated Circuit
• Type: Digital / Analog IC
• Model NO.: S9S08DZ60F2MLH
• MFG.: NXP
• D/C: 17+
• Package: LQFP-64
• Quality: Genuine New Original
• Transport Package: Box
• Origin: China
• HS Code: 8542390000
• Production Capacity: 1000000PCS

Product Description

Description

S9S08DZ60F2MLH:  MCU 8-Bit HCS08 S08 CISC 60KB Flash 3.3V/5V 64-Pin LQFP Brick

Package: LQFP-64

Mfr. Part#: S9S08DZ60F2MLH

Datasheet: (e-mail or chat us for PDF file)

ROHS Status: 

Quality: 100% Original

Warranty: 180 days

Product Status	Active
Core Processor	S08
Core Size	8-Bit
Speed	40MHz
Connectivity	CANbus, I²C, LINbus, SCI, SPI
Peripherals	LVD, POR, PWM, WDT
Number of I/O	53
Program Memory Size	60KB (60K x 8)
Program Memory Type	FLASH
EEPROM Size	2K x 8
RAM Size	4K x 8
Voltage - Supply (Vcc/Vdd)	2.7V ~ 5.5V
Data Converters	A/D 24x12b
Oscillator Type	External
Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount
Package / Case	64-LQFP
Supplier Device Package	64-LQFP (10x10)
Base Product Number	S9S08

The S08D family offers designers scalability and flexibility of migration with pin, peripheral and tool compatibility between S08D family devices. This highly integrated next generation family of MCUs is packed with features designed to provide increased performance, as well as save power, development time, board space and cost.

Key Features

S08 CPU

• 40 MHz core speed, 20 MHz bus speed on S08 CPU
• HC08 instruction set with added BGND instruction

On-Chip Memory

• Up to 128 KB flash read/program/erase over full operating voltage and temperature
• Up to 2 KB EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dualpage erase sector; program and erase while executing flash; erase abort
• Up to 8 KB RAM (16:1 flash/RAM, ratio better than competition)

Power Saving Modes

• Two very low-power stop modes
• Very low-power, real-time interrupt for use in run, wait and stop modes

Clock Source Options

• Oscillator (XOSC)-Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz-38.4 kHz or 1 MHz-16 MHz
• Multi-purpose clock generator (MCG)-PLL and FLL modes; internal reference clock with trim adjustment; external reference with oscillator/resonator options

System Protection

• Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
• Low-voltage detection with reset or interrupt; selectable trip points
• Illegal opcode detection with reset
• Illegal address detection with reset
• Flash block protect
• EEPROM block protect

Peripherals

• ACMPx-Analog comparators with selectable interrupt on rising, falling or either edge of comparator output; compare option to fixed internal bandgap reference voltage
• MSCAN-CAN protocol-Version 2.0 A, B; standard and extended data frames; support for remote frames; five receive buffers with FIFO storage scheme; flexible identifier acceptance filters programmable as: 2 x 32-bit, 4 x 16-bit, or 8 x 8-bit
• SCIx-SCI(s) with LIN 2.0 Protocol and SAE J2602 compliance; master extended break generation; slave extended break detection; LIN slave supplement on SCI1; automatic baud rate correction; message time-out detection
• SPI-Full-duplex or single-wire bi-directional; double-buffered transmit and receive; master or slave mode; MSB-first or LSB-first shifting
• I²C-Up to 100 kbps with maximum bus loading; multi-master operation; programmable slave address; interrupt-driven, byte-by-byte data transfer; broadcast mode enabled
• TPMx-One 6-channel (TMP1) and one 2-channel (TPM2); selectable input capture, output compare or buffered edge-aligned PWM on each channel
• RTC (Real-time counter)-8-bit modulus counter with binary or decimal-based prescaler; external clock source for precise time base, time-of-day calendar or task scheduling functions; free running, on-chip, low-power oscilator (1 kHz) for cyclic wake-up without external components

Development Support

• Single-wire background debug (BDM) interface
• On-chip, in-circuit emulation (ICE) with real-time bus capture

Input/Output

• 87 general-purpose I/O pins and one input-only pin
• 32 interrupt pins with selectable polarity on each pin
• Hysteresis and configurable pull-up device on all input pins
• Configurable slew rate and device strength on all output pins

Package Options

• 100 LQFP 14 x 14 mm
• 64-pin low-profile quad flat pack (LQFP)-10 x 10 mm
• 48-pin LQFP-7 x 7 mm
• 32-pin LQFP-7 x 7 mm

Miscellaneous

• EMC performance
• Wide operating voltage range: 2.7V-5.5V

Background Debugging System

• On-chip BDM

Package

• Pin-compatible with SH, QG family

Product Longevity Program

 

 

Why choosing us

• Located in Shenzhen, the electronic market center of China.
• 100% guarantee components quality: Genuine Original.
• Sufficient stock on your urgent demand.
• Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
• Faster shipment: In stock components can ship the same day .
• 24 Hours service 

 

Notice:

1. Product images are for reference only.
2. You can contact sales person to apply for a better price.
3.  For more products, Pls do not hesitate to contact our Sales team.