SC16IS752IPW,128 DUAL UART Interface IC

• Customization: Available
• Conductive Type: Unipolar Integrated Circuit
• Integration: ULSI
• Model NO.: SC16IS752IPW,128
• Technics: Thin Film IC
• D/C: 17+
• Package: TSSOP-28
• Quality: Genuine New Original
• shape: SMD
• Transport Package: Box
• Origin: China
• HS Code: 8542390000
• Production Capacity: 1000000PCS

Product Description

Description

SC16IS752IPW,128: UART 2-CH 64Byte FIFO 2.5V/3.3V 28-Pin TSSOP T/R

Package: TSSOP-28

Mfr. Part#: SC16IS752IPW,128

 
Datasheet: (e-mail or chat us for PDF file)

ROHS Status: 

Quality: 100% Original

Warranty: 180 days

 

Product Status	Active
Protocol	RS232, RS485
Function	Controller
Interface	I²C, SPI, UART
Standards	-
Voltage - Supply	2.5V, 3.3V
Current - Supply	2mA
Operating Temperature	-40°C ~ 95°C
Package / Case	28-TSSOP (0.173", 4.40mm Width)
Supplier Device Package	28-TSSOP
Base Product Number	SC16IS752

The SC16IS752/SC16IS762 is an I²C-bus/SPI bus interface to a dual-channel high performance UART offering data rates up to 5 Mbit/s, low operating and sleeping current; it also provides the application with 8 additional programmable I/O pins. The device comes in very small HVQFN32 and TSSOP28 packages, which makes it ideally suitable for hand-held, battery-operated applications. This chip enables seamless protocol conversion from I²C-bus/SPI to RS-232/RS-485 and is fully bidirectional. The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752, and in that it supports IrDA SIR up to 1.152 Mbit/s. In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752. The SC16IS752/SC16IS762's internal register set is backward compatible with the widely used and widely popular 16C450. This allows the software to be easily written or ported from another platform. The SC16IS752/SC16IS762 also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support and software reset. This allows the software to reset the UART at any moment, independent of the hardware reset signal.

Key Features

General features

• Dual full-duplex UART
• I²C-bus or SPI interface selectable
• 3.3 V or 2.5 V operation
• Industrial temperature range: -40 °C to +95 °C
• 64 bytes FIFO (transmitter and receiver)
• Fully compatible with industrial standard 16C450 and equivalent
• Baud rates up to 5 Mbit/s in 16× clock mode
• Auto hardware flow control using RTS/CTS
• Auto software flow control with programmable Xon/Xoff characters
• Single or double Xon/Xoff characters
• Automatic RS-485 support (automatic slave address detection)
• Up to eight programmable I/O pins
• RS-485 driver direction control via RTS signal
• RS-485 driver direction control inversion
• Built-in IrDA encoder and decoder supporting IrDA SIR with speeds up to 115.2 kbit/s
• SC16IS762 supports IrDA SIR with speeds up to 1.152 Mbit/s
• Software reset
• Transmitter and receiver can be enabled/disabled independent of each other
• Receive and Transmit FIFO levels
• Programmable special character detection
• Fully programmable character formatting
  • 5-bit, 6-bit, 7-bit or 8-bit character
  • Even, odd, or no parity
  • 1, 1½, or 2 stop bits
• Line break generation and detection
• Internal Loopback mode
• Sleep current less than 30 μA at 3.3 V
• Industrial and commercial temperature ranges
• 5 V tolerant inputs
• Available in HVQFN32 and TSSOP28 packages

I²C-bus features

• Noise filter on SCL/SDA inputs
• 400 kbit/s (maximum)
• Compliant with I²C-bus Fast mode
• Slave mode only

SPI features

• SC16IS752 supports 4 Mbit/s maximum SPI clock speed
• SC16IS762 supports 15 Mbit/s maximum SPI clock speed
• Slave mode only
• SPI Mode 0

 

Why choosing us

• Located in Shenzhen, the electronic market center of China.
• 100% guarantee components quality: Genuine Original.
• Sufficient stock on your urgent demand.
• Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
• Faster shipment: In stock components can ship the same day .
• 24 Hours service 

 

Notice:

1. Product images are for reference only.
2. You can contact sales person to apply for a better price.
3.  For more products, Pls do not hesitate to contact our Sales team.