| Customization: | Available |
|---|---|
| Conductive Type: | Bipolar Integrated Circuit |
| Integration: | MSI |
|
Still deciding? Get samples of US$ 0.25/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DPS310: Pressure Sensor 4.35PSI ~ 17.4PSI (30kPa ~ 120kPa) Absolute 24 b 8-VFLGA
Mfr. Part#: DPS310
Mfr.: INFINEON
Datasheet: 
(e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: ONE YEAR
|
Product Status
|
Active
|
|
|
Applications
|
Board Mount
|
|
|
Pressure Type
|
Absolute
|
|
|
Operating Pressure
|
4.35PSI ~ 17.4PSI (30kPa ~ 120kPa)
|
|
|
Output Type
|
I²C, SPI
|
|
|
Output
|
24 b
|
|
|
Accuracy
|
±0.015PSI (±0.1kPa)
|
|
|
Voltage - Supply
|
1.7V ~ 3.6V
|
|
|
Port Size
|
-
|
|
|
Port Style
|
-
|
|
|
Features
|
Temperature Compensated
|
|
|
Termination Style
|
SMD (SMT) Tab
|
|
|
Maximum Pressure
|
145PSI (999.74kPa)
|
|
|
Operating Temperature
|
-40°C ~ 85°C
|
|
|
Mounting Type
|
Surface Mount
|
|
|
Package / Case
|
8-VFLGA
|
|
|
Supplier Device Package
|
PG-VLGA-8-1
|
|
|
Base Product Number
|
DPS310
|
The DPS310 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature. The pressure sensor element is based on a capacitive sensing principle which guarantees high precision during temperature changes. The small package makes the DPS310 ideal for mobile applications and wearable devices. The internal signal processor converts the output from the pressure and temperature sensor elements to 24 bit results. Each unit is individually calibrated, the calibration coefficients calculated during this process are stored in the calibration registers. The coefficients are used in the application to convert the measurement results to high accuracy pressure and temperature values. The result FIFO can store up to 32 measurement results, allowing for a reduced host processor polling rate. Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface. The measurement status is indicated by status bits or interrupts on the SDO pin.
Typical Applications • Indoor Navigation (floor detection e.g. in shopping malls and parking garages) • Health and Sports (accurate elevation gain and vertical speed) • Outdoor Navigation (GPS start-up time and accuracy improvement, dead-reckoning e.g. in tunnels) • Weather Station('Micro-weather' and local forecasts) • HDD drivers, (leak rate detection in hard disk drives) • Drones (flight stability and height control)
Notice:
){kind=link}