Description
CLRC663: High Performance NFC Reader Solution 32-Pin HVQFN Tray
Package: QFN-32
Mfr. Part#: CLRC663
Datasheet: 
(e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: 180 days
The CLRC663 is a highly integrated transceiver IC for contactless communication at 13.56 MHz. The CLRC663 transceiver IC supports the following operating modes:
- Read/write mode supporting ISO/IEC 14443A/MIFARE Read/write mode supporting ISO/IEC 14443B Read/write mode supporting JIS X 6319-4 (comparable with FeliCa1 Passive initiator mode according to ISO/IEC 18092 Read/write mode supporting ISO/IEC 15693 Read/write mode supporting ICODE EPC UID/ EPC OTP Read/write mode supporting ISO/IEC 18000-3 mode 3/ EPC Class-1 HF
- The CLRC663's internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/MIFARE cards and transponders without additional active circuitry. The digital module manages the complete ISO/IEC 14443A framing and error detection functionality (parity and CRC).
The CLRC663 supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE PLUS and MIFARE DESFire products. The CLRC663 supports MIFARE higher transfer speeds of up to 848 kbit/s in both directions. The CLRC663 supports layer 2 and 3 of the ISO/IEC 14443B reader/writer communication scheme except anticollision. The anticollision needs to be implemented in the firmware of the host controller as well as in the upper layers. The CLRC663 is able to demodulate and decode FeliCa coded signals.The FeliCa receiver part provides the demodulation and decoding circuitry for FeliCa coded signals. The CLRC663 handles the FeliCa framing and error detection such as CRC. The CLRC663 supports FeliCa higher transfer speeds of up to 424 kbit/s in both directions.
Key Features
- High RF output power frontend IC for transfer speed up to 848 kbit/s
- Supports ISO/IEC 14443 A/MIFARE, ISO/IEC 14443 B and FeliCa
- P2P passive initiator mode in accordance with ISO/IEC 18092
- Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF
- Supports MIFARE Classic encryption in read/write mode
- Low-Power Card Detection
- Compliance to "EMV contactless protocol specification V2.0.1" on RF level can be achieved
- Antenna connection with minimum number of external components
- Supported host interfaces:
- SPI up to 10 Mbit/s
- I2C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply
- Separate I2C-bus interface for connection of a secure access module (SAM)
- FIFO buffer with size of 512 byte for highest transaction performance
- Flexible and efficient power saving modes including hard power down, standby and low-power card detection
- Cost saving by integrated PLL to derive system CPU clock from 27.12 MHz RF quartz crystal
- 3 V to 5.5 V power supply
- Up to 8 free programmable input/output pins
- Typical operating distance in read/write mode for communication to a ISO/IEC 14443A/MIFARE Card up to 12 cm, depending on the antenna size and tuning
| Part Status |
Active |
| Type |
RFID Reader |
| Frequency |
13.56MHz |
| Standards |
ISO 14443, ISO 15693, 18000-3, MIFARE, NFC |
| Interface |
I²C, SPI, UART |
| Voltage - Supply |
3 V ~ 5.5 V |
| Operating Temperature |
-25°C ~ 85°C |
| Package / Case |
32-VFQFN Exposed Pad |
| Supplier Device Package |
32-HVQFN (5x5) |
Company Product Line
Certificates
Why choosing us
- Located in Shenzhen, the electronic market center of China.
- 100% guarantee components quality: Genuine Original.
- Sufficient stock on your urgent demand.
- Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
- Faster shipment: In stock components can ship the same day .
- 24 Hours service
Notice:
- Product images are for reference only.
- You can contact sales person to apply for a better price.
- For more products, Pls do not hesitate to contact our Sales team.
Audited Supplier 
(e-mail or chat us for PDF file)
){kind=link}
){kind=link}