Description
W25Q128FVSIG: NOR Flash Serial-SPI 3.3V 128Mbit 16M x 8bit 7ns 8-Pin SOIC Tube
Package: SOIC-8
Mfr. Part#: W25Q128FVSIG
Mfr.: WINBOND
Datasheet: 
(e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: 180 days
The W25Q128FV (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly for Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in space-saving packages.
The W25Q128FV array is organized into 65,536 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256(64KB block erase) or the entire chip (chip erase). The W25Q128FV support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI as well as 2-clocks instruction cycle Quad Peripheral Interface (QPI): Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O and QPI instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.
A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and devices ID and SFDP Register, a 64-bit Unique Serial Number and three 256-bytes Security Registers.
Key Features
- Family of SpiFlash Memories
- W25Q128FV: 128M-bit/ 16M-byte
- 256-byte per programmable page
- Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
- Dual SPI: CLK, /CS, IO, IO, /WP, /Hold
- Quad SPI: CLK, /CS, IO, IO, IO, IO
- Software & Hardware Reset
- Highest Performance Serial Flash
- 1040MHz Single, Dual/Quad SPI clocks
- 208/416MHz equivalent Dual/Quad SPI
- 50MB/S continuous data transfer rate
- More than 100,000 erase/program cycles
- More than 20-year data retention
- Efficient "Continuous Read Mode" and QPI Mode
- Continuous Read with 8/16/32/64-Byte Wrap
- As few as 8 clocks to address memory
- Quad Peripheral Interface (QPI) reduces instruction overhead
- Allows true XIP (execute in place) operation
- Outperforms X16 Parallel Flash
- Low Power, Wide Temperature Range
- Single 2.7 to 3.6V supply
- 4mA active current, <1µA Power-down (typ.)
- -40°C to 85°C operating range
- Flexible Architecture with 4KB sectors
- Uniform Sector/Block Erase (4K/32K/64K-Bytes)
- Program on 1 to 256 byte per programmable page
- Erase/Program Suspend & Resume
- Advanced Security & Identification Features
- Software and Hardware Write-Protect
- Power Supply Lock-Down and OTP protection
- Top/Bottom, Complement array protection
- Individual Block/Sector array protection
- 64-Bit Unique ID for each device
- Discoverable Parameters (SFDP) Register
- 3X256-Byte Security Registers with OTP locks
- Volatile & Non-volatile Status Register Bits
- Space Efficient Packaging
- 8-pin SOIC 150/ VSOP 208-mil
- 8-pin PDIP 300-mil
- 8-pad WSON 6x5-mm / 8x6-mm
- 16-pin SOIC 300-mil (additional /RESET pin)
- 24-ball TFBGA 8x6-mm
- Contact Winbond for KGD and other options
| Memory Type |
Non-Volatile |
| Memory Format |
FLASH |
| Technology |
FLASH - NOR |
| Memory Size |
128Mb (16M x 8) |
| Clock Frequency |
104MHz |
| Write Cycle Time - Word, Page |
50µs, 3ms |
| Memory Interface |
SPI - Quad I/O, QPI |
| Voltage - Supply |
2.7 V ~ 3.6 V |
| Operating Temperature |
-40°C ~ 85°C (TA) |
| Mounting Type |
Surface Mount |
| Package / Case |
8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package |
8-SOIC |
Company Product Line
Certificates
Product Packing details
Why choosing us
- Located in Shenzhen, the electronic market center of China.
- 100% guarantee components quality: Genuine Original.
- Sufficient stock on your urgent demand.
- Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
- Faster shipment: In stock components can ship the same day .
- 24 Hours service
Notice:
- Product images are for reference only.
- You can contact sales person to apply for a better price.
- For more products, Pls do not hesitate to contact our Sales team.
Audited Supplier 
(e-mail or chat us for PDF file)
){kind=link}