Description
CY7C68013A-128AX: USB Interface IC EZ USB FX2LP LO PWR LO IND
Package: TQFP-144
Mfr. Part#: CY7C68013A-128AX
Mfr.: CYPRESS
Datasheet: (e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: 180 days
Cypress Semiconductor Corporation's (Cypress's) EZ-USB FX2LP (CY7C68013A) is a low-power version of the EZ-USB FX2 (CY7C68013), which is a highly integrated, low-power USB 2.0 microcontroller. By integrating the USB 2.0 transceiver, serial interface engine (SIE), enhanced 8051 microcontroller, and a programmable peripheral interface in a single chip, Cypress has created a very cost-effective solution that provides superior time-to-market advantages with low power to enable bus powered applications. The ingenious architecture of FX2LP results in data transfer rates of over 53 Mbytes per second, the maximum-allowable USB 2.0 bandwidth, while still using a low-cost 8051 microcontroller in a package as small as a 56 QFN. Because it incorporates the USB 2.0 transceiver, the FX2LP is more economical, providing a smaller footprint solution than USB 2.0 SIE or external transceiver implementations. With EZ-USB FX2LP, the Cypress Smart SIE handles most of the USB 1.1 and 2.0 protocol in hardware, freeing the embedded microcontroller for application-specific functions and decreasing development time to ensure USB compatibility.
- USB 2.0-USB-IF high speed certified (TID # 40440111)
- Single-chip integrated USB 2.0 transceiver, smart SIE, and enhanced 8051 microprocessor
- Fit, form and function compatible with the FX2
- Pin-compatible
- Object-code-compatible
- Functionally-compatible (FX2LP is a superset)
- Ultra Low power: ICC no more than 85 mA in any mode
- Ideal for bus and battery powered applications
- Software: 8051 code runs from:
- Internal RAM, which is downloaded via USB
- Internal RAM, which is loaded from EEPROM
- External memory device (128 pin package)
- 16 KBytes of on-chip Code/Data RAM
- Four programmable BULK/INTERRUPT/ISOCHRONOUS endpoints
- Buffering options: double, triple, and quad
- Additional programmable (BULK/INTERRUPT) 64-byte endpoint
- 8- or 16-bit external data interface
- Smart Media Standard ECC generation
- GPIF (General Programmable Interface)
- Allows direct connection to most parallel interface
- Programmable waveform descriptors and configuration registers to define waveforms
- Supports multiple Ready (RDY) inputs and Control (CTL) outputs
- Integrated, industry-standard enhanced 8051
- 48-MHz, 24-MHz, or 12-MHz CPU operation
- Four clocks per instruction cycle
- Two USARTS
- Three counter/timers
- Expanded interrupt system
- Two data pointers
- 3.3V operation with 5V tolerant inputs
- Vectored USB interrupts and GPIF/FIFO interrupts
- Separate data buffers for the Set-up and Data portions of a CONTROL transfer
- Integrated I2C controller, runs at 100 or 400 kHz
- Four integrated FIFOs
- Integrated glue logic and FIFOs lower system cost
- Automatic conversion to and from 16-bit buses
- Master or slave operation
- Uses external clock or asynchronous strobes
- Easy interface to ASIC and DSP ICs
Product: |
USB Controllers |
|
Type: |
Peripheral Controller |
|
Mounting Style: |
SMD/SMT |
|
Package / Case: |
TQFP-128 |
|
Standard: |
USB 2.0 |
|
Speed: |
High Speed (HS) |
|
Data Rate: |
480 Mb/s |
|
Supply Voltage - Min: |
3 V |
|
Supply Voltage - Max: |
3.6 V |
|
Operating Supply Current: |
50 mA |
|
Minimum Operating Temperature: |
0 C |
|
Maximum Operating Temperature: |
+ 70 C |
|
Packaging: |
Tray |
|
Brand: |
Infineon Technologies |
|
Core: |
8051 |
|
Interface Type: |
GPIF, I2C, USART |
|
Moisture Sensitive: |
Yes |
|
Operating Supply Voltage: |
3.3 V |
|
Product Type: |
USB Interface IC |
|
Factory Pack Quantity: |
360 |
|
Subcategory: |
Interface ICs |
|
Tradename: |
EZ-USB FX2LP |
|
Unit Weight: |
0.017760 oz |
Company Product Line
Certificates
Why choosing us
- Located in Shenzhen, the electronic market center of China.
- 100% guarantee components quality: Genuine Original.
- Sufficient stock on your urgent demand.
- Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
- Faster shipment: In stock components can ship the same day .
- 24 Hours service
Notice:
- Product images are for reference only.
- You can contact sales person to apply for a better price.
- For more products, Pls do not hesitate to contact our Sales team.