MPU-6500 IMU IC sensor 6-Axis MEMS MotionTracking Device with DMP

• Customization: Available
• Conductive Type: Bipolar Integrated Circuit
• Integration: GSI
• Model NO.: MPU-6500
• Operating Temperature: -55℃ - 125℃
• Shape: Flat
• Technics: Semiconductor IC
• MFG.: INVENSENSE
• D/C: 23+
• Package: QFN24
• Quality: Genuine New Original
• Product status: Active
• Transport Package: Box
• Specification: integrated circuit
• Origin: China
• HS Code: 8542399000
• Production Capacity: 1000000PCS
• Package Size: 20.00cm * 20.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

description

MPU-6500 :   IMU ACCEL/GYRO 3-AXIS I2C 24QFN

Mfr. Part#: MPU-6500

Datasheet: (e-mail or chat us for PDF file)

ROHS Status: 

Quality: 100% Original

Warranty: ONE YEAR
 

 

 

Mounting Style:	SMD/SMT
Package / Case:	QFN-24
Sensor Type:	6-axis
Interface Type:	I2C, SPI
Output Type:	Digital
Acceleration:	2 g, 4 g, 8 g, 16 g
Resolution:	16 bit
Sensitivity:	16348 LSB/g
Minimum Operating Temperature:	- 40 C
Maximum Operating Temperature:	+ 85 C
Supply Voltage - Min:	1.71 V
Supply Voltage - Max:	3.45 V
Operating Supply Current:	3.4 mA
Packaging:	Reel
Packaging:	Cut Tape
Moisture Sensitive:	Yes
Operating Supply Voltage:	1.8 V
Product Type:	IMUs - Inertial Measurement Units
Sensing Axis:	X, Y, Z
Factory Pack Quantity:	5000
Subcategory:	Sensors
Tradename:	SmartMotion
Unit Weight:	0.078527 oz

 

 

The MPU-6500 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) all in a small 3x3x0.9mm package. It also features a 512-byte FIFO that can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. With its dedicated I2 C sensor bus, the MPU-6500 directly accepts inputs from external I2 C devices. MPU-6500, with its 6-axis integration, onchip DMP, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-6500 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2 C port. The gyroscope has a programmable full-scale range of ±250, ±500, ±1000, and ±2000 degrees/sec and very low rate noise at 0.01 dps/√Hz. The accelerometer has a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g. Factory-calibrated initial sensitivity of both sensors reduces production-line calibration requirements. Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, a precision clock with 1% drift from -40°C to 85°C, an embedded temperature sensor, and programmable interrupts. The device features I 2 C and SPI serial interfaces, a VDD operating range of 1.71 to 3.6V, and a separate digital IO supply, VDDIO from 1.71V to 3.6V. Communication with all registers of the device is performed using either I2 C at 400kHz or SPI at 1MHz. For applications requiring faster communications, the sensor and interrupt registers may be read using SPI at 20MHz. By leveraging its patented and volume-proven CMOS-MEMS fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the package size down to a footprint and thickness of 3x3x0.90mm (24-pin QFN), to provide a very small yet high performance low cost package. The device provides high robustness by supporting 10,000g shock reliability.



Applications
• TouchAnywhere™ technology (for "no touch" UI Application Control/Navigation)
• MotionCommand™ technology (for Gesture Short-cuts)
• Motion-enabled game and application framework
• Location based services, points of interest, and dead reckoning
• Handset and portable gaming
• Motion-based game controllers
• 3D remote controls for Internet connected DTVs and set top boxes, 3D mice
• Wearable sensors for health, fitness and sports
 

 

 

 

Certificates







Product Packing details

Why choosing us

• Located in Shenzhen, the electronic market center of China.
• 100% guarantee components quality: Genuine Original.
• Sufficient stock on your urgent demand.
• Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
• Faster shipment: In stock components can ship the same day .
• 24 Hours service 

 

Notice:

1. Product images are for reference only.
2. You can contact sales person to apply for a better price.
3.  For more products inquiry, Pls do not hesitate to contact our Sales team.