Description
AR8033-AL1A: AR8033 Ethernet transceiver is a single port, 10/100/1000 Mbps tri-speed Ethernet PHY
Package: QFN48
Mfr. Part#: AR8033-AL1A
Mfr.: QUALCOMM
Datasheet: 
(e-mail or chat us for PDF file)
ROHS Status:
Quality: 100% Original
Warranty: 180 days
| EU RoHS |
Compliant |
| ECCN (US) |
5A991.b.4.a |
| Part Status |
Unconfirmed |
| HTS |
8542.39.00.01 |
| Number of Channels per Chip |
3 |
| Maximum Data Rate |
1Gbps |
| PHY Line Side Interface |
Yes |
| JTAG Support |
No |
| Integrated CDR |
Yes |
| Standard Supported |
IEEE 802.3az |
| Typical Data Rate (Mbps) |
10/100/1000 |
| Ethernet Speed |
10Mbps/100Mbps/1000Mbps |
| Ethernet Interface Type |
RGMII/SGMII |
| Minimum Operating Supply Voltage (V) |
3.15|2.4|1.04 |
| Typical Operating Supply Voltage (V) |
2.62|1.1|3.3 |
| Maximum Operating Supply Voltage (V) |
1.17|3.45|2.75 |
| Power Supply Type |
Digital|Analog |
| Minimum Operating Temperature (ºC) |
0 |
| Maximum Operating Temperature (ºC) |
70 |
| Supplier Temperature Grade |
Commercial |
| Packaging |
Tray |
| Pin Count |
48 |
| Supplier Package |
QFN EP |
| Mounting |
Surface Mount |
| Package Height |
0.74 |
| Package Length |
6 |
| Package Width |
6 |
| PCB changed |
48 |
| Lead Shape |
No Lead |
The AR8033 Ethernet transceiver is a single port, 10/100/1000 Mbps tri-speed Ethernet PHY. The AR8033 Ethernet transceiver supports both RGMII and SGMII to the MAC. The AR8033 Ethernet transceiver belongs to the Arctic™ PHY family which provides a low power, low BOM cost solution for comprehensive applications including enterprise, carrier and home networks such as CPE, home gateway, enterprise switch, carrier switch/router, mobile base station and base station controller, optical module and media converter, industrial automation and measurement. The AR8033 Ethernet transceiver integrates Green ETHOS® power saving technologies which significantly save power in both active operation and idle condition. Green ETHOS power saving schemes include ultra-low power in cable unplugged mode or port power down mode, as well as automatically optimized power saving based on cable length. The AR8033 Ethernet transceiver supports standard IEEE 802.3az Energy Efficient Ethernet (EEE) and Qualcomm Atheros proprietary SmartEEE™. SmartEEE allows legacy MAC and SoC devices without IEEE 802.3az support to cowork with AR8033 to provide full IEEE 802.3az support. Furthermore, the AR8033 Ethernet transceiver supports Wake-on-LAN (WoL) feature to manage and regulate total system power requirements. The AR8033 Ethernet transceiver embeds Cable Diagnostics Test (CDT) technology for measuring cable length, detecting the cable status, and identifying remote and local PHY malfunctions, bad or marginal patch cord segments or connectors. The AR8033 Ethernet transceiver requires only a single 3.3 V power supply. Embedded regulators are used to generate other required voltages. The AR8033 Ethernet transceiver integrates the termination circuitry at the line side. The AR8033 Ethernet transceiver incorporates a 1.25 Gbps SerDes. This interface can be connected directly to a fiber-optic transceiver for 1000BASE-X/100BASE-FX mode or used as SGMII with MAC. The AR8033 Ethernet transceiver supports Synchronous Ethernet by offering recovered clock output from data on the network-line side. The AR8033 Ethernet transceiver supports IEEE 802.3az standard.
The key features include:
10BASE-Te PHY uses reduced transmit amplitude.
100BASE-TX and 1000BASE-T use Low Power Idle (LPI) mode to turn off unused analog and digital blocks to save power when data traffic is idle.
Features
10BASE-Te/100BASE-TX/1000BASE-T IEEE 802.3 compliant
1000BASE-T PCS and auto-negotiation with next page support
RGMII or SGMII to MAC devices
Fiber and copper combo mode when MAC interface works in RGMII mode
Additional IEEE 1000BASE-X and 100BASE-FX with integrated SerDes
RGMII timing modes support internal delay and external delay on Rx path \
Green ETHOS power saving modes with internal automatic DSP power saving scheme
IEEE 802.3az EEE
SmartEEE which allows legacy MAC and SoC devices without IEEE 802.3az support to cowork with AR8033 to provide full IEEE 802.3az support Wake-on-LAN (WoL) to detect magic packet and notify the sleeping system to wake up
Fully integrated digital adaptive equalizers, echo cancellers, and Near End Crosstalk (NEXT) cancellers
Synchronous Ethernet with frequency selectable recovered clock output
Robust Cable Discharge Event (CDE) protection of ±6 kV
Robust operation over up to 140 meters of CAT5 cable
Automatic Channel Swap (ACS)
Automatic MDI/MDIX crossover
Automatic polarity correction
IEEE 802.3u compliant auto-negotiation
Jumbo frame support up to 10 KB (full-duplex)
Multiple loopback modes for diagnostics
Robust surge protection with ±750 V/line-to-line mode and ±4 kV/line-to-ground mode IEC61000-4-5(2001)
Cable Diagnostic Test (CDT)
Single power supply: 3.3 V, optional for external regulator for core voltage
6 mm × 6 mm, 48-pin QFN package
Industry temperature (I-temp) option available
Company Product Line
Certificates
Product Packing details
Why choosing us
- Located in Shenzhen, the electronic market center of China.
- A turnkey electronic components supplier with ISO certified.
- 100% guarantee components quality: Genuine Original.
- Sufficient stock on your urgent demand.
- Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
- Faster shipment: In stock components can ship the same day .
- 24 Hours service
Notice:
- Product images are for reference only.
- You can contact sales person to apply for a better price.
- For more products, Pls do not hesitate to contact our Sales team.
Audited Supplier 
(e-mail or chat us for PDF file)
){kind=link}
){kind=link}